Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Davie?
Gate installation in Davie typically costs between $2,200 and $9,500 for a complete job, with most residential driveway gate installations landing around $3,800 to $6,500. A basic single swing gate with a manual latch sits at the low end, while a dual-leaf automated driveway gate with underground operators, safety sensors, and keypad access pushes toward the top of the range. These are typical estimates for the Davie market in 2026; the written estimate you receive after an on-site look at your property sets your final price.
We’re Gate Repair Davie, and gate installation is one of our three core services alongside gate repair and electric gate repair. If your existing gate has stopped working, we’ll tell you honestly whether it can be repaired or whether a new installation makes more sense. Call (877) 802-1841 for a free estimate. We answer 24/7.
Key Takeaways
- A typical residential gate installation in Davie runs $2,200 to $9,500 depending on gate type, material, and automation.
- Automation and electrical work are the biggest cost drivers – a manual gate costs a fraction of a fully automated one.
- Davie’s flat lots and sandy soil keep foundation work predictable, but HOA and city requirements can add coordination time.
- Brand-agnostic service means we install and service the system that fits your property, not the one we’re pushing.
- Free estimates and upfront pricing – the written estimate is the final word on cost.
Gate Installation Cost Breakdown (2026)
Here’s how the line items break down for a typical Davie installation. Ranges assume standard residential property; commercial and estate work scales up from there.
| Line Item | Typical Range (2026) |
|---|---|
| Single swing gate, manual (gate panel and hardware only) | $1,200 – $2,800 |
| Dual swing driveway gate, manual | $2,400 – $5,200 |
| Sliding gate, manual (track and panel) | $2,000 – $4,800 |
| Gate operator (automation), residential grade | $900 – $2,400 |
| Gate operator, commercial or estate grade | $2,200 – $5,500 |
| Safety sensors and loop detectors | $250 – $700 |
| Keypad, remote, or intercom access | $180 – $650 |
| Concrete footings and post setting | $350 – $1,200 |
| Electrical run to operator location | $400 – $1,500 |
| Full installation labor (residential) | $900 – $2,800 |
Add those together and you get the all-in ranges above. What pushes a Davie job toward the top: dual-leaf gates with two operators instead of one, long electrical runs from the panel to a gate set far back from the house, commercial-grade operators for an HOA entrance, and any custom metalwork. What keeps it at the low end: a single manual gate in a standard opening with power already at the gate location. The operator brand matters too – a LiftMaster residential arm operator and a FAAC commercial system are both solid, but they sit in different price tiers.
We work on the gate you have and install the system that fits your property, whether that’s a Mighty Mule DIY-entry operator or a DoorKing commercial setup. If you’re unsure what your existing gate is running, we’ll identify it and explain your options before any work begins.
What Affects Gate Installation Pricing in Davie
- Gate material and size. Aluminum and chain-link run lower than ornamental steel or custom wood. A wider driveway gate needs more material and heavier hardware, and a double-leaf driveway gate effectively doubles the panel cost before you add a second operator.
- Automation and electrical work. A manual gate is a fraction of the cost of an automated one. Battery-backup operators are common in Davie where a power drop at the gate isn’t practical; a full electrical run from the panel adds cost but gives you a sturdier, more reliable system over time.
- Property and lot conditions. Davie’s flat terrain and sandy soil usually make footing work straightforward, but a gate set far back from the house, a long driveway, or a lot with drainage swales changes the electrical and footing picture. We look at the actual ground before quoting.
- HOA and city requirements. Many Davie properties sit inside HOAs with gate style and setback rules, and the city may require a permit depending on height, location, and whether the gate is automated. Confirm with your HOA and the city’s building department before ordering a gate. Coordination time can affect the schedule even when it doesn’t change the material price.
- Brand and system type. A residential arm operator, a commercial slide operator, and an estate-level system all land in different price tiers. We’re trained on nine leading brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so we can match the operator to your property rather than forcing one brand.
- Access control features. A basic remote is cheap. A keypad, intercom, phone-app access, or a safety loop system adds cost but earns its keep on a busy driveway or an HOA entrance where dozens of vehicles pass through daily.
How to Save on Gate Installation
You don’t have to cut corners to keep the number down. A few practical moves help:
- Repair before you replace. If your existing gate is sound and only the operator has failed, a repair is almost always cheaper than a new installation. We diagnose first and tell you honestly which way to go. Electric gate repair is what we do – motors, control boards, safety sensors, remotes – so the call to replace only comes when the system is genuinely past it.
- Keep the gate, replace only what’s broken. A working gate panel with a failed operator doesn’t need a whole new gate. Matching a new operator to existing hardware saves the panel and footing cost entirely.
- Consolidate access control. Instead of adding a keypad, intercom, and phone access separately, talk through what you actually need. A single well-chosen access method usually covers a residential driveway.
- Get the estimate before you buy a gate. Buying a gate online before we’ve looked at the opening, the footing, and the power situation often costs more in the end. The on-site estimate is free and it prevents expensive mismatches.
- Plan the electrical run with the install. Running power during installation is cheaper than retrofitting it later. If you’re thinking about automation down the road, mention it now.
Call (877) 802-1841 for a free estimate. Estimates are free, pricing is upfront, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace? How to Decide
The honest answer: repair if the gate structure is sound and the problem is the operator, board, sensor, or remote system. Replace if the gate panels are failing, the posts are compromised, or the system is so outdated that parts are hard to source. That second scenario is rarer than you’d think – we’re brand-agnostic and work on the system you have, so a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system that’s merely malfunctioning is usually repairable.
A full new installation makes sense when you’re upgrading from manual to automated, adding a gate where there wasn’t one, or when a repair estimate approaches the cost of a fresh, reliable system. We’ll lay out both numbers and let you decide. Our technicians have up to 11 years of experience diagnosing exactly this question on gate systems across Davie and the surrounding area.
What a Typical Davie Gate Installation Involves
Installation starts with a look at the property: the opening, the ground, the power situation, and how vehicles and people move through. From there we set the posts to proper footing depth, hang and align the gate, install the operator if you’re automating, wire in the safety sensors and access control, and test the whole system. A manual swing gate is a shorter job than a dual automated driveway gate with an electrical run, but both finish with a walkthrough so you understand how the system operates and what to check over time.
Safety matters on any automated gate. Gate operators carry real force, and the wiring and power side is not a place for a homeowner to experiment. Safety sensors, loop detectors, and proper wiring exist for a reason – they stop a closing gate on a person or vehicle. That’s work for a trained technician, and it’s a big part of why we treat electric gate work as a specialty rather than an add-on.
Why Brand Matters Less Than You Think
Plenty of gate companies push one brand hard. We don’t. Whether your property needs a LiftMaster operator for a residential driveway or a FAAC or DoorKing system for a commercial entrance, the right choice depends on your gate, your traffic, and your budget – not on what a company prefers to sell. We’re trained on nine leading brands and we service systems from all of them, so you’re never stuck with a company that only knows one system.
From a broken arm to a full installation, we cover the full lifecycle: diagnosis, repair, and replacement when it’s truly needed. That means one point of contact instead of calling a second contractor when your system is beyond repair.
FAQs – Gate Installation Cost
How much does a basic gate installation cost in Davie?
A basic single swing gate with a manual latch in Davie typically runs $1,200 to $2,800 for the gate and hardware, with a full installed job usually landing between $2,200 and $4,500. Add automation and the range climbs toward $6,500 or more. Call (877) 802-1841 for an exact quote – estimates are free.
Is it cheaper to repair my existing gate or install a new one?
Repair is usually cheaper when the gate structure is sound and only the operator, board, or sensor has failed – often a few hundred to a couple thousand dollars versus a full installation in the thousands. A new installation makes more sense when panels or posts are failing or the system can’t be sourced. Call (877) 802-1841 and we’ll give you both numbers.
How much does an automated gate cost in Davie?
A fully automated residential driveway gate in Davie typically runs $4,500 to $9,500 installed, including the operator, safety sensors, access control, and electrical work. Commercial and estate-grade systems cost more. Call (877) 802-1841 for a written estimate – it’s free and it sets your final price.
Can you install a gate on a property inside an HOA in Davie?
Yes, though HOA rules on gate style, height, and placement vary, and some automated gates require a city permit. Confirm both with your HOA and the city’s building department before ordering. We’ll coordinate the installation around your approved specs. Call (877) 802-1841 to talk through your project.
Which gate brands do you install and service?
We’re trained on nine leading brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – covering residential, commercial, and estate-level systems. We install and service the system that fits your property. Call (877) 802-1841 for a free estimate.
How long does a gate installation take?
A manual single swing gate is typically a shorter job, while a dual automated driveway gate with an electrical run takes longer. Exact timing depends on power, footing, and whether a permit is involved. Call (877) 802-1841 and we’ll give you a realistic window for your property.
Get Your Free Gate Installation Estimate
Whether you’re adding a gate, upgrading to automation, or deciding between repair and replacement, the estimate is free and the pricing is upfront. Our technicians have up to 11 years of experience with gate systems from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we work on the gate you have. Call (877) 802-1841. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Davie market as of 2026. Gate Repair Davie offers free estimates – call (877) 802-1841.
Written by the team at Gate Repair Davie.
What Our Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Rashad Bryant"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Ernesto Mendoza"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Tamika Robinson