Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Hollywood, FL
We provide independent Mighty Mule repair and service across Hollywood, FL, from canal-front swing gates east of US-1 to HOA-managed slide operators west of I-95. What sets our Mighty Mule work apart here is that we read the hardware against the coast: a salt-air lot near the Intracoastal and an inland subdivision gate fail for different reasons, and we diagnose each on its own terms. We work on Mighty Mule openers daily, interpreting real control boards, limit switches, and battery-backup harnesses instead of treating the unit as a black box. Our technicians have up to 11 years of experience. Call (877) 802-1841 for a free estimate.
Why Hollywood Residents Choose Us for Mighty Mule Service
We’re an independent service provider, not a Mighty Mule dealer and not affiliated with or authorized by the manufacturer. That matters in Hollywood. It means our recommendations come from what your gate actually needs, not from a sales script that ends at “replace it.” We know the Mighty Mule lineup and the way its parts behave in subtropical air, so we skip the guesswork and go straight to the battery, the control board, the actuator arm, or the accessory wiring.
Hollywood is our kind of service area because the equipment here spans the whole range: manual driveway gates on older stucco homes by the canals, automatic swing operators in the gated subdivisions west of I-95, and community slide gates that an HOA board needs working again. When you call, we talk through the symptom, the model, and the lot, then schedule a visit that fits your week. No pressure to replace what can be repaired. No mystery about what the job will involve. If it’s a Mighty Mule operator on a Hollywood property, we’ve likely worked on something close to it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Mighty Mule Gate Repair Problems We Solve in Hollywood
These are the Mighty Mule failures we see most in Hollywood, and each has a local cause attached to it.
- Surge-damaged control boards. Hollywood’s summer thunderstorms and the brownouts that follow them fry logic boards on west-side HOA and subdivision gates, especially from June through November. A board that takes a hit often leaves the operator dead or stuck in one direction. We test the board, confirm the damage, and replace it when that’s the honest fix.
- Dead or sulfated backup batteries. Mighty Mule operators lean on their battery to move the gate, so a battery that’s lost its charge shows up as a gate that stalls halfway or won’t budge on the first command. Salt air and heat shorten battery life on Hollywood lots near the Intracoastal.
- Salt-air corrosion on the actuator arm and mounts. On east-side canal and Intracoastal properties, salt spray eats at the arm, limit-switch hardware, and operator mounts. The result is binding, false stops, and electrolysis at the fasteners. This is the single most Hollywood-specific Mighty Mule problem we handle.
- Photo-eye and keypad faults. Moisture intrusion and insect nesting in the accessory wiring make gates reverse without warning or ignore the keypad altogether. These nuisance trips are common in humid Hollywood air and usually trace back to a fouled eye or a corroded connection.
- Hinge and post wear. Older Hollywood homes east of the Intracoastal carry manually hung driveway and pool gates, and when a Mighty Mule operator is pushing a sagging gate, the operator gets blamed for a hinge problem. We check the gate’s swing and the post before we touch the motor.
Mighty Mule Service in Hollywood: What Local Conditions Mean for Your Equipment
Hollywood’s east-side canal and Intracoastal frontage puts salt spray on gate hardware year-round. That’s the fact that changes how Mighty Mule repair works here. The same swing operator that holds up for years on an inland lot west of I-95 will corrode and seize far faster on a lot near the water, because salt settles into the actuator arm, the operator mounts, and every fastener that holds the assembly together. A typical call on a salt-air Hollywood property starts with a gate that opens partway and stalls or ignores the remote until the keypad is pressed twice. The usual cause is a tired backup battery working against a corroded arm and binding hinges. On an inland HOA gate, the same symptom more often traces to a surge-damaged control board or a fouled photo-eye. Same brand, same complaint, two different repairs. Knowing which side of Hollywood the gate sits on tells us where to look first.
Mighty Mule Models & Products We Service in Hollywood
We service the full range of Mighty Mule equipment found on Hollywood properties. That includes the FM series swing gate openers (FM350, FM500, FM600), the MM series swing openers (MM260, MM360, MM560, MM572), and Mighty Mule slide gate operators. We also handle the accessory line that keeps those systems working: wireless keypads, photo-eye sets, and solar and battery backup kits.
On parts, we use genuine Mighty Mule control boards, arms, and battery harnesses where the model is still supported, and quality aftermarket photo-eyes, keypads, and remotes where they fit and hold up to Hollywood’s humidity. We don’t stock parts or claim a parts inventory; we source what your specific unit needs. If you’re not sure which Mighty Mule product you have, describe the gate and the symptom and we’ll sort it out together.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Hollywood
Mighty Mule repair in Hollywood is priced per job after we look at the gate, and the written estimate sets the final price. We don’t quote over the phone by symptom, because a stalled gate on a salt-air lot and a dead gate on an inland HOA property can be very different repairs. What drives cost here:
- The failed component: a photo-eye or battery costs far less than a control board or a new operator.
- Corrosion damage: salt-air arms, mounts, and fasteners can turn a small repair into a larger one.
- Gate condition: a sagging gate or worn hinges may need attention before the operator can run clean.
- Access and wiring: accessory faults and photo-eye runs add time to the job.
The free estimate covers a real diagnosis: we test the battery under load, check the arm and limit switches for corrosion and free movement, and verify photo-eye alignment and wiring before we recommend anything. You’ll know the price before work starts. Call (877) 802-1841 for an exact quote. Estimates are free.
Serving Hollywood, FL – Our Local Coverage Area
We serve Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Hollywood
A gate that stops halfway on a Hollywood canal-front lot usually has a weak backup battery combined with a corroded actuator arm and binding hinges. Salt spray from the canal and Intracoastal accelerates corrosion on the arm and mounts, so the operator fights resistance it wasn’t built for. We test the battery under load and check the arm and hinges before recommending parts. Call (877) 802-1841 for an exact quote. Estimates are free.
It can, but surges and brownouts during Hollywood’s June-through-November storm season are the leading cause of control-board failure on west-side HOA and subdivision gates. A surge protector on the circuit and a healthy battery help, but a board that’s already taken a hit needs testing and often replacement. We diagnose the board directly rather than guessing. Call (877) 802-1841 to book a visit.
When the remote works but the keypad doesn’t, the fault is almost always in the keypad itself or its wiring: moisture intrusion, insect nesting, or a corroded connection at the accessory terminal. Hollywood’s humid air makes this a frequent call. We check the keypad, its power, and the wiring run to the operator. Call (877) 802-1841 for an exact quote. Estimates are free.
Often it can be repaired, and that’s our first answer. If the control board and mount are sound, we replace the corroded arm, fasteners, and battery and get the gate moving again. When a board-level failure hits an older operator with a corroded mount and a dead battery, the honest call is often full operator replacement rather than repeated board swaps. We tell you which applies after we inspect it. Call (877) 802-1841 to schedule.
It can be, for lighter residential and community slide gates, but the west-side HOA and subdivision properties we see need reliable access control and surge protection to hold up through storm season. We service Mighty Mule slide operators and their keypads and photo-eyes, and we’ll tell you plainly if your gate’s weight and duty cycle call for something heavier. Call (877) 802-1841 to talk it through.
Service Areas Near Hollywood
We also service Mighty Mule gates in Pembroke Pines and Davie, along with nearby Miami-Dade communities such as Miami Shores, Westchester, and Coral Terrace. Wherever your gate sits, the same independent diagnosis and repair apply. If you’re just outside Hollywood, call and we’ll confirm coverage.
Book Your Mighty Mule Service in Hollywood Today
Whether it’s a swing operator that stalls on a canal-front lot or an HOA slide gate that won’t answer the keypad, we can help. Call (877) 802-1841 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service when the schedule allows. Get your Mighty Mule gate working again.
Written by the team at Gate Repair Davie.