Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Hollywood
If your driveway gate won’t open, or the community slide gate has been stuck half-travel since the last storm, call (877) 802-1841. We’re the gate repair team Hollywood residents, HOA boards and property managers call when an operator quits, a hinge post rusts through, or a keypad stops taking codes. We know the difference between an east-side swing gate eaten by salt spray near the Intracoastal and a western 55+ park’s automatic operator that lost its settings after an outage, and we quote the job before anyone touches it. Our technicians have up to 11 years of experience, and the estimate is free.
Why Hollywood Homeowners Call Gate Repair Davie for Gate Repair
Hollywood property owners call us because we work on the gate they already have. Whether it’s a Mighty Mule DIY-era opener on a canal-front driveway or a FAAC commercial operator running a gated community entrance, we diagnose the actual failure instead of steering you toward a replacement you don’t need. Electric gate repair is our core specialty, not an add-on, so the technician who shows up already knows motors, control boards, safety loops and remote systems inside out.
That matters in a city as split as Hollywood. East of US-1, the canal-front and Intracoastal homes carry older manual and lightly automated gates where corrosion is the enemy. West of I-95, the gated subdivisions and 55+ mobile-home parks rely on operators that have to survive hurricane season. We serve both, and we keep the fix honest: repair first when repair is the right call, full installation only when the system is genuinely past saving. The written estimate sets the price, and it’s agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Hollywood
Wrought Iron Gate Repair in Hollywood usually starts with rust, and nowhere more than on the salt-air lots near the beach and the Intracoastal. Salt spray works into hinge points, weld joints and fasteners year-round, and the damage shows up as a gate that drags, sags or won’t latch square. We treat the rusted metal, replace eaten fasteners with marine-grade hardware, correct the sag and rehang the gate so it swings clean. Typical wrought iron repair in Hollywood runs $250 – $650, with post and footing work on the higher end.
Rust Treatment and Hinge Replacement
Hinges and hinge posts take the worst of the salt. We remove the failing hardware, address the corrosion at the mount, and refit with hardware that holds up in coastal air. When the footing itself has softened, the post gets reset before the gate goes back on.
Sag Correction and Realignment
A gate that sags usually has a hinge, a post or a weld to blame. We find which one, fix it, and realign the gate so it clears the ground and closes without force. Getting this right early keeps the operator from straining against a dragging gate.
Metal Gate Repair in Hollywood
Metal Gate Repair in Hollywood covers the aluminum, steel and mixed-metal driveway and pool gates common on the older mid-century concrete-block homes east of the Intracoastal. Wind, salt and years of use loosen welds, wear locks and pull frames out of square. We reweld broken joints, repair or replace latches and locks, and straighten bent frames. A typical metal gate repair in Hollywood runs $200 – $550, and weld and rust repair on a heavily corroded gate sits at the upper end of that range.
Weld and Frame Repair
Broken welds on a metal gate are a structural problem, not a cosmetic one. We reweld the joint properly and check the rest of the frame for cracks that haven’t opened yet. A gate that’s rewelded and squared swings true and stops fighting the operator.
Lock and Latch Repair
A gate lock that won’t catch leaves the property open. We repair or replace the latch, align the strike so it engages cleanly, and check that the gate closes squarely against it. Manual and automated gates both get the same attention here.
Trusted Brands We Service in Hollywood
We work on the brands Hollywood actually has installed. That includes LiftMaster and Linear operators on residential driveways, FAAC and BFT systems on commercial and HOA entrances, and Mighty Mule and Ghost Controls units on DIY-installed gates. We don’t claim to stock parts for every brand on a shelf, but we know these systems well enough to diagnose fast and get the right component ordered without guesswork. Because we service the gate you own rather than pushing a single manufacturer, repair stays the first honest answer. One call covers diagnosis, repair and, only if it’s truly needed, replacement.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Hollywood Homes
- Battery backup failing during a storm outage. A summer thunderstorm knocks out power and the LiftMaster or Linear operator won’t run on its backup battery, leaving 55+ residents unable to open the gate by hand. We test the battery and the backup circuit and get the gate moving again.
- Misaligned safety photocells on HOA slide gates. Wind-blown debris or a landscape crew knocks a photo-eye out of line and the gate reverses or stays open. We realign the safety eyes and verify the entrapment protection is working.
- Keypad and loop detectors dead after a surge. Power surges knock out access-control boards in gated mobile-home parks, locking out residents who depend on a code or remote. We diagnose the board and restore reliable entry.
- Salt corrosion on east-side hinge posts and operator mounts. Canal-front and Intracoastal swing gates rust at the fasteners and mounts until the gate sags or the operator strains. We treat the post, fit marine-grade hardware and rehang before realigning.
Pricing for Gate Repair in Hollywood, FL
Gate repair in Hollywood is priced per job, and the written estimate you get before work starts is the final word on cost. As a guide, a typical hinge and hardware repair runs $150 – $400, a photo-eye or access-control board fix runs $180 – $450, an operator motor or control board replacement runs $350 – $900, and post reset or footing work runs $300 – $800. Wrought iron rust and weld repair sits around $250 – $650. What moves the number is the brand, whether the operator needs parts ordered, and how much corrosion the salt air has done. Estimates are free, and we agree the price with you before any work begins.
We Also Serve Cities Near Hollywood
Hollywood sits in the middle of our service area, and we also cover Pembroke Pines, Davie, Miami Shores and Sweetwater for the same gate repair and electric gate work. If you’re just outside Hollywood, call and we’ll confirm coverage. You can also read more about our Hollywood service area and the surrounding communities we work in.
Serving Hollywood, FL – Our Local Coverage Area
We serve Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hollywood
It usually means the operator’s backup battery is weak or the control board isn’t holding memory through the surge that follows an outage. In Hollywood’s storm season, that combination is common on older LiftMaster and Linear units. We test the battery and board and replace whichever has failed. Call (877) 802-1841 for a free estimate.
In most cases it can be repaired. Salt spray corrodes hinges and fasteners first, and treating the rust, fitting marine-grade hardware and rehanging the gate usually brings it back. Replacement only makes sense when the frame or post has structurally failed. Call (877) 802-1841 and we’ll give you an honest answer.
A randomly opening slide gate is typically a misaligned photocell, a faulty loop detector or a control board damaged by a power surge. Wind-blown debris and landscape crews knock safety eyes out of line, which confuses the operator. We diagnose the access-control side and fix the root cause. Call (877) 802-1841 for a free estimate.
Yes, and in Hollywood’s western 55+ communities it’s a routine request rather than a specialty. We retrofit battery backup and solar gate openers so the gate keeps working when the grid goes down. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (877) 802-1841.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule operators, covering both residential and commercial systems. We work on the gate you have rather than pushing one brand. See our gate repair service for the full scope, or call (877) 802-1841 for a free estimate.
Whether you’re a homeowner near the Intracoastal or an HOA board out west that needs a community gate working again, call (877) 802-1841 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the price, agreed before any work starts. Our technicians have up to 11 years of experience, and we work on the gate you already have.
Written by the team at Gate Repair Davie.