Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Davie Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls gate repair in Davie, and we work on these openers often enough to know how they behave before we arrive. Ghost Controls builds a narrow line of solar-capable tube-arm and slide openers for residential and rural-entry gates, which means the failure modes are specific and predictable: arm geometry, control board behavior, and battery charging under a solar setup. We’re an independent service provider, not affiliated with or authorized by Ghost Controls, and that independence is the point. We repair the equipment you already own and we don’t steer you toward a replacement you don’t need.
Davie is a western Broward horse-town, and many properties here are ranchettes, hobby farms and equestrian estates on oversized lots with private drive gates, corral gates, and solar or swing entry gates. That makes gate work here a different job than the standard suburban double-gate you’d see in Plantation or Cooper City. Wide-span gates, rural driveway automation, and livestock-safe installations are the norm, and Ghost Controls openers fit that picture well. Call (877) 802-1841 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Gate Repair Davie for Your Ghost Controls Gate Repair?
Our technicians have up to 11 years of experience, and ghost controls systems come across their bench regularly. That matters because the details are not interchangeable with the major brands. The control board revisions differ between production runs, the accessory harness quirks on the AXS and AXSL openers catch people out, and the battery and solar charging behavior has its own logic. A general gate company that mostly sees LiftMaster equipment will spend your diagnostic time learning your opener. We already know it.
We use quality parts that fit Ghost Controls equipment. For the proprietary pieces that’s the manufacturer’s own control logic rather than a board that happens to bolt up but doesn’t match the limit and accessory behavior. For hardware like hinges, rollers, keypads and wiring, quality aftermarket parts are a reasonable call and often the smarter one.
Warranty-safe service is part of the job, not an afterthought. We document what we find, we don’t cut into the harness or bypass safety inputs to make a gate move, and we keep the original configuration intact wherever it’s still sound. If a component is still under the manufacturer’s coverage, that changes what we recommend, and we’ll tell you so before anyone touches it. The estimate is free, the price is set per job by the written estimate, and you approve it before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Davie
Most Ghost Controls calls in Davie trace back to one of five things. Knowing which one you’re dealing with is the difference between an opener repair and a gate repair.
- Tube-arm binding or stalling mid-travel. The arm pushes the gate along a fixed arc, and when the gate leaf sags on worn hinges or the post leans, the arm gets pushed outside the geometry it was designed for. The opener ends up fighting the gate instead of driving it. You’ll hear the motor strain and the gate stop partway, and the opener often gets blamed for a problem that starts at the hinge.
- Control boards and battery harnesses damaged by heat and moisture. Davie’s subtropical climate brings heavy summer downpours and high humidity, and on solar setups the board cycles through repeated low-voltage conditions. Moisture intrusion at the terminals and heat stress on the board are the usual outcomes. A board that looks fine can still be misreading voltage and faulting.
- Limit and obstruction-sensing faults. A gate that stops reversing correctly, or reverses when nothing is in the way, usually has a mis-set limit switch or a failing actuator. This one is worth diagnosing properly rather than adjusting blind, because a safety input that’s been bypassed to stop the beeping is a genuine hazard around livestock and children.
- Keypads, remotes and intercoms losing pairing. Accessories that drop out after working fine for months usually point to antenna placement, weak battery voltage, or corroded terminal connections. It’s rarely the accessory itself. We check voltage and the antenna run before we replace a keypad that was working last week.
- Settled posts and gates out of plumb after heavy rain. Davie’s sandy, shifting soil and the drainage swales along rural roads mean driveway gates settle out of plumb after a wet stretch. On a tube-arm opener that settlement throws the arm angle off and shows up as a stall. On estate properties along Griffin or Orange Drive, summer thunderstorms also put opener electronics at risk without surge protection.
How a typical Ghost Controls call usually goes
A typical Ghost Controls call starts with a swing gate that opens partway and then stalls, or reverses for no visible reason, on an AXS or AXSL tube-arm opener. The usual root cause is the gate leaf sagging on worn hinges or a leaning post, which pushes the arm past its designed geometry so the opener fights the gate instead of driving it. A qualified local pro checks the gate’s swing and hinge play first, realigns or repairs the hinge and post, then tests the arm, limit settings and battery voltage before touching the control board. That order matters. It means the opener is only replaced when it is genuinely at fault.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Ghost Controls’ own boards, arms, batteries and accessory receivers are the right call on these openers. The control logic is proprietary, and aftermarket boards often fail to match the limit and accessory behavior, which turns a repair into a callback. We don’t stock or carry genuine Ghost Controls parts and we’re not a dealer. What we do is fit quality parts that work correctly with your equipment, and tell you plainly which ones need to come from the manufacturer.
Quality aftermarket is reasonable for hinges, rollers, keypads and wiring. Those are hardware, and a good aftermarket hinge does the same job as the original.
On repair versus replace: when the gate itself is structurally sound, repairing the opener and realigning the gate is usually the smarter money. Replacement only comes up when the arm, the board and the gate structure are all at end of life together. We won’t quote a new system to solve a hinge problem. Call (877) 802-1841 and we’ll tell you which situation you’re in.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We start with the gate, not the opener. Swing, hinge play, post plumb and latch alignment all get checked before we look at the arm or the board. On a Davie property with a long driveway gate, that inspection often explains the fault on its own.
- 2
Repair or install. If the gate needs realignment or hinge work, that happens first. Then we address the opener: arm, limits, battery voltage, solar charging, and accessory pairing on the keypad or remote. New installations get measured and scheduled, with wiring, safety edges and anchoring planned around your gate type.
- 3
Test. We cycle the gate through full travel, check the obstruction sensing and reversing behavior, confirm the limits hold, and verify the battery is charging properly on a solar setup. Nothing gets signed off until the gate reverses the way it should.
- 4
Warranty. We document the work and the parts, which matters for any remaining manufacturer coverage on your Ghost Controls equipment. If a component is still under warranty, we’ll say so before we replace it.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Davie
We service and install the full range of Ghost Controls equipment a Davie property is likely to have. That includes the AXS series single-swing tube-arm openers (AXS1 and AXS2), the AXSL series dual-gate tube-arm openers for double gates, and the Heavy-Duty TDS series tube-arm openers for heavier leaves. We also cover the Ghost Controls slide gate opener line for V-track and cantilever gates.
On the service side that means motor repair, battery backup and solar charging diagnosis, control board and harness work, limit and obstruction-sensing correction, and accessory pairing for keypads, remotes and intercoms. Gate realignment is a big part of it. On a wider rural gate, realignment is often the repair.
On the installation side we handle new Ghost Controls openers on existing gates and build installations from the ground up when a gate is being added. New installations are measured and scheduled, with a written price before any work begins.
We Also Service These Brands
Ghost Controls is one brand in a broader skill set. We also service LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, Elite and Mighty Mule systems, from residential DIY-entry openers to commercial-grade equipment. That breadth means we diagnose the gate you have rather than the brand we’d prefer to sell. If your system is a mix of brands, or you’re not sure what’s on the post, we’ll identify it on the visit.
FAQs – Ghost Controls Gate Repair Service in Davie
No. We are an independent service provider and have no affiliation with or authorization from Ghost Controls. We repair, install and service Ghost Controls equipment with quality parts that fit it, and we’re upfront that we’re not a dealer, not factory-trained by the manufacturer and not a warranty agent for them. What we bring is hands-on familiarity with how these openers fail. Call (877) 802-1841 if you’d like to talk through your system before booking.
Yes. For proprietary components like control boards, arms, batteries and accessory receivers, the manufacturer’s own parts are the right call because the control logic is proprietary and aftermarket boards often don’t match the limit and accessory behavior. For hardware like hinges, rollers, keypads and wiring, quality aftermarket parts do the job. We don’t stock or carry genuine Ghost Controls parts, but we’ll tell you exactly which components need to come from the manufacturer and which don’t. Call (877) 802-1841 for a free estimate.
Most Ghost Controls repairs are completed in a single visit, though the time depends on what’s actually wrong. A realignment and hinge repair takes less time than a control board or harness replacement, and solar charging faults need a full charge cycle check that can’t be rushed. We diagnose the gate first, then the opener, so we’re not guessing at the counter. Call (877) 802-1841 and we’ll give you a realistic picture for your gate.
We cover the AXS single-swing tube-arm openers, the AXSL dual-gate tube-arm openers, the Heavy-Duty TDS tube-arm openers, and the Ghost Controls slide gate opener line for V-track and cantilever gates. That includes motor repair, battery backup, solar charging diagnosis, board and harness work, limit and obstruction-sensing faults, accessory pairing, and gate realignment. Call (877) 802-1841 for a free estimate on your system.
Repair work by a qualified independent technician doesn’t automatically void a manufacturer’s warranty, but the terms are set by Ghost Controls, not by us, so read your documentation before work starts. We service in a warranty-safe way: we don’t bypass safety inputs, we don’t cut into the harness, and we keep the original configuration where it’s sound. If a component is still under the manufacturer’s coverage, we’ll tell you so we can decide together whether to pursue that route first. Call (877) 802-1841 with any questions.
Ghost Controls gate repair in Davie is priced per job from a written estimate, and the estimate is free. There’s no flat rate that covers every call, because a hinge realignment and a control board replacement are different jobs with different parts. What we can promise is that the price is quoted and agreed before any work starts, so there’s no invoice surprise afterward. Call (877) 802-1841 for an exact quote on your gate.
Book Your Ghost Controls Service in Davie, FL
If your Ghost Controls gate is stalling, reversing, or dropping its remotes, we can get it working again. We repair the gate you have, with the opener you already own. Call (877) 802-1841 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Davie.