Gate Access Control Cost in Davie - What It Actually Costs, Quoted Free

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Access Control Cost in Davie?

Gate access control in Davie typically runs $450 to $1,900 for a residential system, with most keypad, intercom, and remote-entry upgrades landing between $650 and $1,200 installed. Commercial and HOA systems with telephone entry, card readers, or multi-unit directories usually start around $2,000 and climb past $5,500 depending on how many openings and credentials you’re managing. The written estimate sets the final price, and we give that estimate free after we’ve seen the gate.

Access control is the part of a gate that decides who gets through: the keypad, the intercom, the remote receiver, the safety loops, the control board, and on larger properties the telephone entry unit that rings the office. When it fails, the gate itself may be fine and the brains behind it aren’t. That’s a different repair from a bent arm or a dragging slide, and it’s priced differently too. Our technicians have up to 11 years of experience across nine major gate brands, so we’re usually diagnosing an access problem on equipment we already know.

Key Takeaways

• Residential access control: roughly $450 to $1,900 installed, depending on the entry method and operator compatibility.
• Commercial and multi-unit systems: $2,000 to $5,500 and up.
• Repairs (keypad, receiver, board, loop) are often cheaper than full replacement and usually the first honest answer.
• Estimates are free and priced per job, not by phone.
• Call (877) 802-1841. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Gate Access Control Cost Breakdown (2026)

The table below shows typical, estimated price ranges for the access control work we’re called out for most in Davie. These are ranges, not quotes. A single gate with one keypad and a good operator sits near the bottom. A gated community with telephone entry and card readers sits near the top.

What pushes a job toward the top of those ranges? Usually three things. The first is how many openings you’re controlling: one driveway gate is straightforward, but a community entrance with a separate exit lane, a pedestrian gate, and a package area means more devices and more wiring. The second is existing infrastructure. If the conduit is already there and the operator accepts the new entry device, a keypad swap is a short visit. If the old system ran on a discontinued board and the wiring has to be re-pulled, the labor grows. The third is credential management. A card or fob system that has to be programmed for dozens of residents takes more setup time than one keypad code, and the pricing reflects it.

The operator matters too. Access control is only as good as the board it talks to, and whether we’re working on a LiftMaster operator or a FAAC commercial system changes what’s plug-and-play and what needs an adapter or a new receiver. Brand-agnostic service means we figure that out on your equipment rather than steering you toward a product line we’d rather sell.

What Affects Gate Access Control Pricing in Davie

Davie has a mix that shows up in access control estimates: single-family homes on larger lots, gated communities with shared entrances, and commercial and equestrian properties where a driveway gate also has to stop traffic. The gate is often a good distance from the house or office, and that distance is one of the biggest drivers of cost.

• Distance from power and the entry point. A keypad 40 feet from the operator needs conduit, wire, and sometimes a low-voltage power run. On a long Davie driveway, that trenching and wire pull can outweigh the cost of the entry device itself.
• Gate type and weight. A slide gate on a track and a swing gate on arms have different safety and sensing needs. Heavier commercial slide gates need more robust loops and sensors, which pushes the price up.
• Number of openings controlled. One gate, one code is the simplest job. A community with an in-lane, an out-lane, and a separate resident entrance multiplies the devices and the programming.
• Credential type. A single shared keypad code is the least expensive. Individual codes, fobs, cards, or app-based entry for a whole HOA cost more because the system has to manage and revoke access per person.
• Existing wiring and operator condition. Old or spliced wiring slows diagnosis. A control board that’s already failing can turn a “just add a keypad” call into a board replacement, so we test the operator before quoting the new device.
• Indoor versus outdoor exposure. Entry stations on a gate post take sun and rain year-round in South Florida. Choosing an enclosure rated for outdoor use costs a little more up front and saves callbacks.

One thing specific to this area: our storms are the real remote-access stress test. When a gate strand or a power blip knocks out a receiver, the homeowner finds out at the worst time, usually pulling up to a gate that won’t open. If your access system has been flaky since the last big weather event, that history is worth mentioning when you call.

Repair or Replace the Access Control System?

Repair is the first honest answer more often than you’d expect. A dead keypad, a bad receiver, a single failed safety loop, or a receiver that’s lost its remotes are all individual component failures. Fixing them keeps a working operator and a working gate, and the bill stays in the hundreds rather than the thousands.

Replacement makes sense when the core is gone. A discontinued control board with no parts path, a telephone entry unit that can no longer be programmed, or a system where the wiring is failing across multiple devices all point toward a new package. It’s also worth replacing when a homeowner wants credential management the old system simply can’t do, like per-resident codes or an audit trail of who opened the gate.

We price repair and replacement separately so you can see the difference. If the gate operator is sound, we’ll tell you, and we’ll quote the access fix. If it’s not, you’ll hear that too, and you won’t have to call a second contractor for the installation. Diagnosis, repair, and replacement sit with the same team.

How to Save on Gate Access Control

Most of the savings in access control come from planning and diagnosis, not from shopping for cheap hardware.

• Get the diagnosis right the first time. Know whether the problem is the keypad, the receiver, the board, or the safety loop before buying parts. Throwing a new keypad at a bad board wastes money. Our estimates are free, and the diagnostic visit is where we narrow that down.
• Keep the operator if it’s healthy. A new access device on a good operator is far cheaper than replacing both. We test the operator first so you’re not paying for equipment you don’t need.
• Fix small faults early. A failing safety loop that’s ignored can leave a gate stuck open or refusing to move. Addressing one device before it takes down the board usually costs less.
• Match the credential to the property. A single-family home rarely needs card readers. A small HOA may not need the largest telephone entry unit. Right-sizing the system saves more than any brand swap.
• Bundle the access estimate with the operator check. If the gate has other symptoms, have them looked at in the same visit so the diagnosis covers the whole system rather than one device at a time.

For a written number on your specific gate, call (877) 802-1841 and we’ll set up a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Where Our Access Control Work Fits

Access control sits inside the electric side of what we do, which is the part we consider our specialty. A keypad that won’t take a code, a receiver that’s lost its remotes, an intercom with no audio, a loop that won’t detect a car: these live in the same box as the motor and the board, and they fail together more often than people expect. When you call about access, you’re calling about electric gate repair, and that’s a core service here, not an add-on.

We also handle the gate itself, from a dragging slide to a damaged hinge, and full installation when a system is past saving. So the same visit that diagnoses your access problem can also catch the mechanical issue underneath it. If you want the full picture of what we cover, start with gate repair Davie. For property-specific details on the area we serve, see our Davie page.

One safety note we won’t skip: the wiring and power feeding an access control system can bite, and a gate operator holds enough force to injure someone. Safety loops and photo-eyes are there for a reason, and a gate that moves without them working is a hazard. Leave the electrical work to a trained technician, and don’t disable a safety device to get a gate moving. That’s the kind of thing we check on every visit.

If you’ve got a brand like Mighty Mule or Ghost Controls on the residential side, or a DoorKing, BFT, Linear, Viking, or Elite system on a commercial or HOA property, we’re already familiar with the family. Our technicians have up to 11 years of experience, and the approach is the same either way: get it working again on the equipment you own.

FAQs – Gate Access Control Cost

How much does a gate keypad cost in Davie?

A wired gate keypad typically costs $250 to $650 installed in Davie, and a wireless keypad and receiver runs $300 to $750. The price depends on whether power and wire are already at the post. If a new run has to be pulled to a distant entry point, the labor moves the number up. Call (877) 802-1841 for an exact quote, and the estimate is free.

How much does gate access control repair cost?

Most access control repairs fall between $350 and $1,200, with a control board replacement near the middle of that range and a safety loop repair near the top. A simple receiver or keypad swap can land under $500. We diagnose before quoting, so you’re paying for the actual failed part. Call (877) 802-1841 and we’ll book the estimate.

Is it cheaper to repair or replace an access control system?

Repair is usually cheaper when a single component fails: a keypad, a receiver, a loop, or a set of safety sensors. Replacement makes more sense when the board is discontinued, the wiring is failing across devices, or you need credential features the old system can’t do. We quote both so you can compare, and the written estimate sets the final price.

How much does a commercial or HOA gate system cost?

Commercial and multi-unit access control in Davie typically starts around $2,000 and can run to $5,500 or more, depending on how many openings, entry stations, and credentials you manage. Telephone entry units run $1,200 to $3,000, and card or fob readers cost $700 to $2,200 per opening. Call us for a per-property estimate, and it’s free.

Can you come the same day for an access control problem?

Same-day service is often available for access control calls, and our technicians have up to 11 years of experience diagnosing them. Call (877) 802-1841. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

What Happens When You Call

You tell us what the gate is doing and what brand it is, if you know. We ask a few questions to narrow the likely cause, then set a time for an on-site estimate. The estimate is free, and it’s written. We diagnose the actual failure, quote the repair or replacement on that written estimate, and get the gate working again. That’s the whole sequence, with one team handling diagnosis, repair, and replacement if it comes to that.

Call (877) 802-1841 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. From a dead keypad to a full new entry system, we work on the gate you have.

Pricing reflects the Davie market as of 2026. Gate Repair Davie offers free estimates – call (877) 802-1841.