Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Davie?
Gate parts and welding in Davie typically run from $150 to $450 for common repairs, with most hardware or hinge work landing near the low end and on-site welding or operator board replacement pushing toward $450 or more. A single replacement part like a roller, latch, or arm bracket is usually $40 to $120 plus the visit. A full on-site weld repair, swing arm rebuild, or post anchor fix generally falls between $250 and $650 for a residential gate, and commercial or estate systems climb higher once heavy panels and welds are involved.
These are typical estimated ranges for the Davie market in 2026, and the written estimate after we see the gate sets the final price. Gate repair in Davie starts with a free estimate every time. Call (877) 802-1841 to get one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most residential gate parts and welding jobs in Davie cost roughly $150 to $450.
- On-site welding repairs on swing and slide gates typically run $250 to $650.
- Operator control boards and motors are the priciest single parts, often $180 to $600 depending on brand and model class.
- Free estimates, upfront pricing, and a satisfaction guarantee come standard.
- Our technicians have up to 11 years of experience across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
Gate Parts & Welding Cost Breakdown (2026)
Here’s how the line items usually stack up for a Davie gate job in 2026. Every range is an estimate; the written estimate you get on-site is what counts.
| Item | Typical Estimated Range |
|---|---|
| Replacement rollers, hinges, and brackets | $40 – $120 per part |
| Latches, catches, and stops | $50 – $140 |
| Chain, idler, and track hardware | $60 – $160 |
| Hinge or bracket weld repair (on-site) | $150 – $400 |
| Panel, post, or frame weld repair | $250 – $650 |
| Swing arm replacement (operator) | $150 – $350 |
| Slide gate carriage and V-groove wheels | $120 – $350 |
| Control board replacement | $180 – $500 |
| Motor or operator replacement | $350 – $900+ |
| Safety photo-eye sensors and loops | $90 – $300 |
| Remote and receiver pairing | $60 – $180 |
| Full parts and welding labor bundle (typical residential) | $150 – $450 |
What pushes a bill toward the top of that table? Heavy commercial or estate panels take more welding prep and more labor per joint. Brand-specific boards for FAAC, BFT, and DoorKing commercial operators cost more than a hobby-grade Mighty Mule control board. Slide gates add carriage and track work on top of the weld. And when rust has eaten into a frame seam, we’re welding new steel, not just re-tacking a hinge. The low end belongs to straightforward residential swing gate jobs on a LiftMaster or Linear operator where one part and a quick weld solve it.
We work on the gate you have, not just the brands we’d prefer to sell. That keeps the honest answer repair whenever repair makes sense.
What Affects Gate Parts & Welding Pricing in Davie
A few local factors move the price more than the part itself. Here’s what to expect when we look at your gate.
- Gate material and gauge. Aluminum and light-gauge steel are easier and cheaper to weld than heavy wrought iron or galvanized frames. Davie has plenty of both, and older wrought-iron gates with rusted seams always cost more to fix than a clean aluminum job.
- Brand and parts class. A Mighty Mule or Ghost Controls control board runs a fraction of a DoorKing commercial board. We name the brand on the estimate so you see what you’re paying for. Whether it’s a LiftMaster residential operator or a FAAC commercial system, the price range shifts.
- Swing vs. slide. Swing gates are the cheaper repair on average because the hardware is simpler. Slide gates add carriage wheels, a track, and a safety loop, and any of those can turn a $200 weld into a $500 job.
- Electric and automated systems. Electric gate repair is what we do, and it’s also where the highest single-part costs come from: motors, control boards, photo-eye sensors, and remote receivers. A broken weld is cheap next to a dead board.
- Access, landscaping, and slope. A gate bracketed by mature South Florida landscaping or set on a sloped driveway takes longer to access and handle safely. More setup time means more labor.
- Aluminum versus steel corrosion. South Florida humidity and summer rain speed up rust on steel gates and oxidation on aluminum. We quote the weld prep and any rust treatment as a line item, not a surprise.
- Whether the gate is worth repairing. If the frame is bent, the post anchors are pulling out of the concrete, or the operator is failing on everything, we’ll tell you when repair no longer pencils. Replacement is always an option because we install gates from the ground up.
How to Save on Gate Parts & Welding
You don’t need a discount to keep the bill down. You need a technician who diagnoses accurately the first time and parts that fit the gate you already own. Here’s how that plays out in practice.
- Get the free estimate before anything is ordered. Call (877) 802-1841 and we’ll walk the gate, name the brand, and quote the line items in writing. That’s the price. No service-call fee surprise.
- Repair the part, not the whole operator. A dead control board, a worn swing arm, or a cracked hinge is often a fraction of a full operator replacement. Our technicians have up to 11 years of experience and know which parts on a LiftMaster, FAAC, or Linear system fail first.
- Catch welds before they crack through. A hinge that’s slightly loose or a frame seam that’s starting to rust is cheaper to weld now than after it fails and drops a gate panel. If you hear a metal clunk on every cycle, get it looked at.
- Keep the safety sensors clean and aligned. Photo-eye faults are one of the most common “broken gate” calls we get, and cleaning or realigning them is far cheaper than a control board. That’s preventive, not a plan, and we price it per job.
- Bundle repair and hardware in one visit. If three hinges and a latch are worn, fix them together rather than paying for three separate visits. One trip, one weld, one estimate. Some of that bundling logic is spelled out on our Davie page, where we cover how local jobs typically go.
Free estimates and upfront pricing mean the number you hear is the number you’ll pay. Installations, replacements, and full gate builds are all quoted the same way, per job, after we see it.
FAQs – Gate Parts & Welding Cost
How much does welding a gate cost in Davie?
On-site welding for a residential gate in Davie typically falls between $150 and $650 depending on what’s being welded and how heavy the gate is. A loose hinge or bracket sits near the low end; a full panel, post, or frame repair climbs to the top. Commercial and estate gates run higher. Call (877) 802-1841 for a free written estimate.
How much do gate parts cost in Davie?
A single replacement part usually runs $40 to $160 for rollers, hinges, latches, brackets, and chain hardware. Control boards, motors, and photo-eye sensors cost more, roughly $90 to $900 depending on brand and model class. Name the brand and we’ll quote the exact part on the estimate. Estimates are free.
Is it cheaper to repair or replace a gate in Davie?
Repair is usually cheaper: a typical $150 to $650 parts and welding job is well under a full replacement. Replacement starts to make sense when the frame is bent, the post anchors are pulling out, or multiple systems are failing at once. We’ll tell you straight on the estimate and quote both if replacement looks likely. Call (877) 802-1841 for the free estimate.
Can you come today to look at my gate in Davie?
Same-day service is available for many jobs. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (877) 802-1841.
Do you work on my gate brand and handle the welding too?
Yes. We work on the gate you already have, and we cover parts, welding, and electric gate repair across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. So whether it’s a residential Ghost Controls arm or a DoorKing commercial operator with a cracked weld, it stays with one technician. Call (877) 802-1841 for the free estimate.
When your gate won’t latch, the weld is failing, or the operator is dead, the next call should be to a technician who knows the brand on the gate. Call (877) 802-1841 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get an upfront price, a written estimate, and a repair that holds.
Pricing reflects the Davie market as of 2026. Gate Repair Davie offers free estimates – call (877) 802-1841.
What Our Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Nabil Mansour"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Ernesto Mendoza"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Robert Walsh