Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Davie?
Gate repair in Davie typically runs $180 to $650 for most residential fixes, with the common middle ground around $250 to $420 for a motor, control board, or hardware repair on an automated system. Small fixes like a misaligned latch, a damaged hinge, or a remote that won’t pair usually land at $120 to $220. Full operator replacement or a gate that needs new posts and framing climbs into the $700 to $2,400 range depending on gate weight, material, and whether the property is residential or commercial. These are typical 2026 estimates; the written estimate we give you after we look at the gate sets the final price.
We work on the gate you have, which matters for cost. Because our technicians carry working knowledge of LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, they don’t spend a diagnostic visit figuring out what brand they’re looking at. That shortens the diagnosis and often the job. For more on the full scope of what we handle, see our gate repair service and the Gate Repair Davie overview.
Key Takeaways
- Most Davie residential gate repairs fall between $180 and $650.
- Electric and automated gate problems (motors, boards, sensors, remotes) are the most common category and usually run $250 to $550.
- Gate installation, when repair no longer makes sense, ranges from $2,200 to $8,500 or more depending on material and automation.
- Free estimates, upfront pricing, and satisfaction guarantee. Call (877) 802-1841. We answer 24/7.
Gate Repair Cost Breakdown (2026)
Here’s what the line items look like in the Davie market for 2026. Ranges reflect typical residential and light commercial work. Commercial-grade systems and estate gates sit at the top of each band or above it.
| Repair Type | Typical Cost Range |
|---|---|
| Hinge, latch, or roller replacement | $120 – $220 |
| Gate arm or operator repair (LiftMaster, FAAC, BFT, Linear, Viking) | $250 – $550 |
| Control board replacement | $280 – $600 |
| Safety loop, photo-eye, or sensor repair | $180 – $400 |
| Remote, keypad, or access system reprogramming | $120 – $260 |
| Slide gate track, wheel, or guide repair | $200 – $480 |
| Post reinforcement or footing repair | $350 – $900 |
| Full operator replacement (residential) | $700 – $1,600 |
| Full operator replacement (commercial / estate) | $1,400 – $2,400 |
| New gate installation (no automation) | $2,200 – $5,500 |
| New gate installation with full automation | $4,500 – $8,500+ |
What pushes a job toward the top of a range? Heavy materials (steel and wrought iron cost more to handle than aluminum or wood), failed control boards on older commercial operators, posts that have shifted after years of South Florida rain and soil movement, and any system where a previous repair used mismatched parts. What keeps it lower? Simple mechanical fixes, a single failed component, and a gate whose brand we already know well, which is most of them. Electric gate repair is what we do, and having worked across all nine of those brands means fewer parts-and-guess visits.
What Affects Gate Repair Pricing in Davie
Davie pricing isn’t random. A handful of factors drive the number up or down, and a few of them are specific to how homes and commercial properties here are built and used.
- Gate material and weight. Aluminum and lighter ornamental gates cost less to repair than heavy steel or solid wood. The heavier the gate, the more strain on the operator, the arms, and the posts, and the more labor to safely work on it.
- System type. A basic DIY-level Mighty Mule or Ghost Controls swing operator is straightforward. A DoorKing or FAAC commercial system with access control, vehicle loops, and multiple remotes takes more diagnostic time and often pricier boards.
- Automation vs. manual hardware. A manual gate fix is usually mechanical and cheaper. Once a motor, control board, or safety sensor is involved, the range moves up because the parts and the diagnostic work do.
- Property type and access. Residential driveways are quick to access. HOA entrances and commercial lots can require coordination, traffic control, and working around operating hours, which adds labor.
- Local ground movement and rain. Davie’s sandy soil and heavy summer rain can shift gate posts and saturate footings over time. A leaning post or a track that’s out of level often needs more than a hardware swap.
- Parts availability. Common operators (LiftMaster, Linear, Mighty Mule) have parts that are easy to source. Less common commercial boards can take longer to locate, which affects the job’s timing and sometimes the price.
One more factor worth naming: what the last repair left behind. Gates that have been patched with mismatched parts, bypassed sensors, or the wrong operator for the gate weight tend to cost more to set right because the technician has to undo before fixing. A clean starting point makes the estimate tighter.
What Does Electric Gate Repair Cost in Davie?
Electric gate repair in Davie usually runs $250 to $600 for the common failures: a motor that won’t run, a control board that’s failed, a safety loop that’s triggered a fault, or remotes that won’t pair. Commercial and estate systems can push past that because the operators are larger and the access hardware is more complex.
Electric and automated gates are a different animal from a manual swing gate. A gate that won’t open isn’t necessarily a broken gate; it’s often a board fault, a sensor reading, or a wiring issue that a generalist can’t trace. Our technicians work on motors, circuit boards, safety sensors, and remote access systems as a primary specialty, not an afterthought. If your LiftMaster operator is dead or your FAAC commercial arm is acting up, the diagnostic starts in the right place.
A word on safety: gate operators carry genuine hazards. High-torque arms, heavy panels that can crush, and slide gates that can come off track are not DIY territory. Electrical work on the operator’s power supply and control wiring should be handled by a trained technician. That’s not a sales line; it’s how we approach every electric gate job.
Repair or Replace? How to Decide
Repair is usually the honest answer, and we’ll say so. Replacement starts to make sense when the gate structure itself is failing, when the operator is so old that parts can’t be sourced, or when the repair cost approaches the price of a new system. A rough rule: if a single repair comes in under roughly a third of replacement cost, repair is generally the better call.
Here’s how it usually breaks down:
- Repair wins when the gate frame is sound and one component failed. Motor, board, sensor, remote, hinge, latch, track wheel: single-component fixes are worth it almost every time.
- Replace the operator only when the board is obsolete and the gate itself is fine. Swapping the operator keeps the gate and spares the cost of new framing.
- Replace the whole system when posts have shifted, the frame is rusted through or warped, or the operator and gate no longer match. This is where a full installation comes in, and we handle that from the ground up so you don’t need a second contractor.
Because we’re brand-agnostic, our recommendation isn’t shaped by which brand we prefer to sell. We work on the system you have, and we’ll tell you plainly when repair is the smarter money.
How to Save on Gate Repair
There’s no magic discount, but there are practical ways to keep the number down:
- Get it looked at early. A gate that’s sticking, running slow, or reversing on its own is usually a small, cheap fix. Left alone, a strained motor damages the board, and the cheap fix becomes a pricey one.
- Fix the cause, not the symptom. A gate that stops mid-travel isn’t always a motor problem. If a post is loose or a track is off, replacing hardware won’t hold; get the alignment right once.
- Keep the sensor path clear. A surprising share of “gate won’t close” calls turn out to be a blocked or misaligned safety sensor. Clearing the path and checking for obstructions is free and takes a minute.
- Use the free estimate. Our estimates are free and the price is set per job by the written estimate, so you know the number before any work starts. Call (877) 802-1841.
- Consider a new installation before throwing money at a failing system. If a gate is genuinely beyond repair, the money goes further on a new system than on a third round of patches.
How Long Does Gate Repair Take in Davie?
Most common residential gate repairs are done the same day. A hinge, latch, remote, or sensor fix often takes under an hour on site. A motor or control-board replacement usually runs one to three hours, depending on access and whether the part is on hand. Slide gate track and post work can take longer because alignment has to be set and tested. Same-day service is available, and larger installation jobs are scheduled based on scope.
Can You Repair My Gate Brand?
Probably, and if we can’t, we’ll tell you. We service systems from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering both DIY-entry brands and professional-grade commercial systems. Whether it’s a LiftMaster operator at a Davie home or a FAAC commercial system at an HOA entrance, the diagnostic approach is the same: trace the fault, fix the cause, get it working again. If the gate is beyond repair, we install new ones too, so the diagnosis, repair, and replacement all come from one point of contact.
FAQs – Gate Repair Cost
How much does gate repair cost in Davie?
Most Davie gate repairs cost $180 to $650, with common automated fixes around $250 to $420. Small mechanical fixes start near $120, while full operator replacement runs $700 to $2,400. Call (877) 802-1841 for an exact quote; estimates are free.
Is it cheaper to repair or replace a gate?
Repair is cheaper in most cases, often a fraction of replacement cost when the gate frame is sound and one component failed. Replace the whole system only when the frame, posts, or operator are genuinely beyond saving. Call (877) 802-1841 and we’ll give you a straight answer based on the gate, not on what we’d rather sell.
How much does electric gate repair cost in Davie?
Electric and automated gate repair in Davie typically runs $250 to $600 for motor, control board, sensor, or remote issues. Commercial and estate systems can run higher. Call (877) 802-1841 for a free estimate on your specific system.
Do you charge for estimates?
No. Estimates are free, and the price is set per job by the written estimate before any work starts. Call (877) 802-1841. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can you come today?
Same-day service is often available for common gate repairs in Davie. Call (877) 802-1841. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
What brands do you service?
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, across residential, commercial, and estate systems. If your brand isn’t listed, call (877) 802-1841 and we’ll confirm before you book.
How much does a new gate installation cost in Davie?
New gate installation in Davie typically runs $2,200 to $5,500 without automation and $4,500 to $8,500 or more with a full automated system, depending on material, size, and access. Call (877) 802-1841 for a free on-site estimate.
Our technicians have up to 11 years of experience, we’re licensed and insured, and we stand behind the work with a satisfaction guarantee. Whether your gate needs a small fix or a full new installation, we can get it working again and give you an honest number up front.
Get a Free Gate Repair Estimate in Davie
If your gate is stuck, slow, or acting up, don’t wait for a small problem to become a big one. Call (877) 802-1841 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We work on the gate you have, with working knowledge of the brands you’re most likely to own, and a straight answer on repair versus replace.
Pricing reflects the Davie market as of 2026. Gate Repair Davie offers free estimates – call (877) 802-1841.
Written by the team at Gate Repair Davie.
What Our Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Sofia Delgado"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Maria Ramirez"Sent photos of everything before and after, which I needed for our HOA. Didn't have to ask twice."
- Keisha Grant