Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pembroke Pines, FL
Gate work in Pembroke Pines looks different from gate work almost anywhere else in South Florida. Most of this city was built as planned, deed-restricted HOA villages between the 1980s and the 2000s, which means the gates here are shared community entry gates and driveway operators that belong to a board, not a single homeowner. Gate installation and the retrofit of aging operators are what we do most in Pembroke Pines, whether the property runs a Mighty Mule driveway arm or a FAAC commercial slide operator. Call (877) 802-1841 for a free estimate.
Why Pembroke Pines Homes Are Different
Pembroke Pines grew up as a master-planned city, and the housing stock shows it. Single-family homes and townhomes across ZIP codes like 33028 were built inside HOA villages with decorative aluminum and wrought-iron gates installed at original build. A large share of those gates are now hitting the 15 to 25 year mark, and their original slide and swing operators, keypads and safety sensors are failing at the same time. That makes retrofitting and replacing operators the core of the trade here rather than brand-new installs on empty lots.
The climate adds its own pressure. Salt-laden air and near-constant humidity corrode aluminum and steel hardware faster than most homeowners expect, and heavy summer thunderstorms stress operator electronics and photo-eye sensors. Frequent lightning and hurricane-season wind loads mean a gate and its operator have to be anchored for storm exposure, not just bolted down. Add HOA boards and property managers into the mix, and every job has an approval step that a single-family driveway gate never does.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Pembroke Pines Services
The two things Pembroke Pines property owners call us about most are a gate that has stopped working and the electric system behind it. Each has its own page, and each starts with a free on-site estimate.
Gate Repair in Pembroke Pines
A gate repair call here usually comes from an HOA manager or a homeowner in a village whose entry gate has jammed, dropped on its track, or stopped latching. Salt air eats at hinges, rollers and aluminum frames, and a slide gate that comes off its track is a heavy panel that has to be handled carefully rather than forced. We work on the gate you already own, whatever the brand, and diagnose before we quote. For the full breakdown of sub-jobs and typical costs, see Gate Repair in Pembroke Pines.
Electric Gate Repair in Pembroke Pines
Electric gate repair is where our technical depth shows. Motors, control boards, safety loops, photo-eye sensors and remote access systems all fail in their own ways, and the humidity and lightning in Pembroke Pines only speed that up. Because one community entry gate serves dozens of homes, a single dead operator or keypad becomes a neighborhood-wide access problem, so we treat diagnosis as the priority. Our technicians have up to 11 years of experience with systems like LiftMaster and BFT. Details live on our Electric Gate Repair in Pembroke Pines page.
Gate Installation in Pembroke Pines
Gate installation in Pembroke Pines is mostly a replacement story. The aluminum slide and swing entry gates that went in during the city’s 1980s to 2000s build-out are now well past their original operators, and salt air plus summer storms have worn the hardware that came with them. When a board decides the repair math no longer works, gate installation becomes the smarter path, and we handle it from the ground up rather than handing you off to a second contractor.
Because most of these properties sit inside deed-restricted HOA villages, a new gate is rarely a same-week decision. The board approves the style and the operator, hardware gets ordered, and the install is scheduled around that. We work on Mighty Mule and LiftMaster driveway systems as readily as we do FAAC and BFT commercial entry operators, so the recommendation follows the property, not a brand we’d rather sell you.
Automatic Gate Installation
Signs you need it
The operator on your existing entry or driveway gate has been repaired repeatedly and now cycles unreliably, or the gate has no automation at all and every car means someone gets out to open it.
What it costs in Pembroke Pines
Automatic gate installation in Pembroke Pines typically runs from $800 to $2,500 for the operator and controls, with the written estimate setting the final price once we’ve seen the gate and the power run.
How we do it
We measure the gate and the opening, confirm the power source and anchoring for storm exposure, order the operator and access controls, then mount, wire and test the full cycle with the safety edges and photo eyes before we hand over the remotes.
Driveway Gate Installation
Signs you need it
Your driveway gate is sagging, rusted through at the frame, or so far out of alignment that the operator can no longer move it without strain.
What it costs in Pembroke Pines
A new driveway gate in Pembroke Pines typically falls between $1,500 and $6,000 depending on span, material and whether automation is included, and the estimate you approve is the price you pay.
How we do it
We set posts to proper footing depth, hang the gate so it swings or slides true, then fit the operator, keypad and safety sensors and run a full open-close test in both directions.
What Gate Installation Costs in Pembroke Pines
| Item | Typical range in Pembroke Pines |
|---|---|
| Automatic gate operator installed | $800 – $2,500 |
| Driveway gate installed | $1,500 – $6,000 |
| Sliding gate installed | $2,000 – $7,500 |
Do I need a permit to install a gate in Pembroke Pines?
Most Florida cities require a permit for a new gate and its electrical work, and an HOA village usually needs board approval as well. Ask the city’s building department and your property manager before ordering hardware. Call (877) 802-1841 and we’ll walk you through what the estimate needs to cover.
Can you install a gate on an existing HOA entry that already has old hardware?
Yes. Replacing an aging entry gate and its operator is the most common installation we do in Pembroke Pines, since many village gates date to the original build. We measure the existing opening, confirm the power and anchoring, and quote the replacement in writing before any work starts.
Brands We Service in Pembroke Pines
We work on the gate you have, and our technicians are experienced with Mighty Mule, LiftMaster, FAAC, BFT and the other major brands found across Pembroke Pines communities. Parts are ordered for the job rather than stocked, so turnaround depends on the operator. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pembroke Pines, FL
| Service | Typical range in Pembroke Pines |
|---|---|
| Automatic gate installation | $800 – $2,500 |
| Driveway gate installation | $1,500 – $6,000 |
| Sliding gate installation | $2,000 – $7,500 |
| Gate repair call | $150 – $600 |
| Electric gate repair | $200 – $900 |
| Operator or control board replacement | $350 – $1,400 |
| Keypad or access control replacement | $150 – $650 |
| Safety sensor or photo-eye repair | $120 – $400 |
In Pembroke Pines, price climbs with gate span, the material you choose, commercial-grade operators for a shared entry, and any anchoring or power work needed for storm exposure. Every price we give is quoted and agreed before any work starts, and the written estimate is what sets the final number.
Neighborhoods We Serve in Pembroke Pines
We cover the HOA villages and single-family pockets across Pembroke Pines, including the 33028 area, and we’re used to coordinating with boards and property managers rather than a single owner. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we answer the phone 24/7, so a gate that fails outside those hours gets booked into the next opening.
- Pembroke Falls
- Chapel Trail
- Silver Lakes
- Grand Palms
- Pembroke Isles
Service Area – Cities Near Pembroke Pines
Pembroke Pines sits in the middle of our South Florida coverage, and we work the surrounding cities on the same basis: a free on-site estimate, a written price, and no work until you’ve approved it. If you’re just outside the city line, we can usually reach you from the same schedule. Nearby communities we serve include Davie, FL, Hollywood, FL, Miami Shores, FL and Sweetwater, FL, along with our home base covered on Gate Repair Davie.
Serving Pembroke Pines, FL – Our Local Coverage Area
We serve Pembroke Pines and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pembroke Pines
For repair calls we aim for same-day service, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Installation work is measured, ordered and scheduled rather than same-day. Call (877) 802-1841 and we’ll book the earliest opening.
Yes, and most of our Pembroke Pines work involves exactly that. Because one shared entry gate serves dozens of homes, we’re used to providing a written scope the board can approve, then scheduling the repair or installation around the community’s access needs.
We cover the city’s HOA villages and single-family neighborhoods across Pembroke Pines, including ZIP code 33028 and the communities around it, plus the surrounding cities. If you’re unsure whether your address falls inside our coverage, call (877) 802-1841 for a free estimate.
Whether a shared entry gate has failed or your driveway operator is on its last cycle, the next step is a free on-site estimate with a written price you approve before any work begins. Call (877) 802-1841. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Our technicians have up to 11 years of experience, and we’ll tell you honestly whether repair gets it working again or replacement is the better call.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Pembroke Pines Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Maria Ramirez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Sofia Delgado"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Oscar Flores